Kappa 320 – keeps all options open
The Kappa 320 stands out with its broad spectrum of possibilities for processing wire cross-sections of 0.05 mm² up to 10 mm²:
- extremely precise and powerful blade axis design
- comparable wire length measurement with automatic length compensation
- wire feed parts can be changed without tools
- changeover times reduced through unique sensors
- memory for process parameters, applied pressure valves and cable diameter
- processing set for short wire lengths starting from 30 mm
Kappa 320’s technical data
| Wire cross-section, stranded wires* | 0.05 – 10 mm² AWG 30 – 8 |
|---|---|
| Max. outer diameter | 10 mm (0.4 in.) |
| Length accuracy | Repeat accuracy ± (0.2 % + 1 mm (0.04 in.) |
| Flat cable processing | Optional 12 mm (0.47 in.) |
| Wire length range | 1 – 800’000 mm (0.039 in. – 874.9 yd.) |
| Short wire lengths | Optional 30 mm |
| Max. wire transport speed | 4.0 m/s (157.5 in./s) |
| Max. stripping lengths | Full strip Side 1: 100 mm (3.94 in.) Side 2: 40 mm (1.57 in.) Semi strip Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) Multi-step strip Side 1: 999.9 mm (39.37 in.) Side 2: 999.9 mm (39.37 in.) |
| Intermediate stripping Number and length |
Optional |
| Automatic conductor detector (automatic detection of cut depth, cable end monitoring) |
Optional |
| Cable detector (queue, end and slip monitoring, zero-cut optimization, outside diameter measurement) |
Optional |
| Length measurement system | Optional |
| Straightening unit | Optional |
| IOCS interface (expandable) | 2 (4) |
| USB/ethernet | Standard |
| Noise level | < 70 dBA |
| Drive system (with motorized closing axis) |
Single roller |
| Production table | Optional |
| Electrical connection | 110/230 VAC ±10% 50/60 Hz 300 VA |
| Pneumatic connection | Optional for blade cleaning |
| Dimensions (W × H × D) | 510 × 380 × 470 mm (20 × 15 × 18.5 in.) |
| Weight | 34 kg (75 lbs) |